AUTONET TV

Vive la Differential at Westside Automotive in Houston

There are a lot of drivers in Houston who are due for a differential service, but had never heard of a differential before. With front-wheel drive being so common in TX these days, the differential is just taken care of during a transmission service, so most Houston folks don't even have to think about it. And rear-wheel drive differentials don't need to be serviced for years, so it's understandable that it's not something on the top of your mind. It's not uncommon for people in Houston to not know they have a differential, let alone know that it needs service.

To better understand what a differential does, think about a track at any TX high school. There are lanes marked off on the track. For the longer distance races, the starting lines are staggered. The starting lines for the outside lanes are ahead of the starting lines for the inside lanes. That's to compensate for the longer length of the outside lanes. Staggering the starting lines means that each runner has the same distance to run.

The differential compensates for the difference in speeds between the inside vehicle wheel and the outside wheel in a turn, because they have to travel together through slightly different distances.

It's a very important function. When you think of it, all the power to get a vehicle moving goes through the differential. Most cars weigh between 3,000 and 6,000 pounds (1,400 and 2,800 kg) – trucks even more. The power from the engine goes through the transmission and then through the differential to the drive wheels.

That's a lot of work and requires very heavy duty parts. And those parts need protection. The differential fluid lubricates the gears in the differential and keeps them cool. The fluid eventually gets dirty and worn down. Some kinds of differentials require special additives that break down over time. So manufacturers recommend intervals for when to replace your differential fluid.

Your knowledgeable Westside Automotive service technician will drain the used fluid and check it out for metal bits, which could be a sign of excessive wear on the gears. He'll then replace the fluid and install the additives if necessary.

Your Westside Automotive service advisor can look up the vehicle manufacturer's recommended service interval or you can check your owner's manual.

At Westside Automotive, we've been providing quality automotive service for our valued Houston customers since . If you need to schedule differential maintenance, or any other automotive service, give us a call at 281-589-8984.

Westside Automotive
12510 Oxford Park Dr.
Houston, TX 77082
281-589-8984
http://www.houstonwestsideautomotive.com

Fuel System Cleaning at Westside Automotive for Better Performance

Hi Houston residents. Let's talk fuel injectors. A fuel injector is a valve that delivers fuel to a vehicle's engine. It has to deliver the precise amount of fuel to precisely the right place, precisely when the engine needs it. The fuel also has to be mixed with air before it can burn in the engine.

Fuel injectors are engineered to spray fuel in a specific pattern into the engine. (The pattern varies by engine type and design.) In order to achieve these spray patterns, the fuel must be pressurized.

Vehicles have one fuel injector for each cylinder in the engine. Your vehicle's control computer constantly monitors the engine and various sensors in the vehicle.  It also adjusts the fuel injectors accordingly so that they can deliver the proper amount of fuel to the engine. As you can see, fuel injectors are a sophisticated and vital part of your vehicle's engine. Because fuel injectors are such precision instruments, dirt and contaminants are a serious detriment to their performance. When an injector gets gummed up, it affects the pressure, pattern and timing of the fuel delivery. The result is a decrease in fuel efficiency and loss of engine performance for Houston residents.

So it's to Houston residents' advantage to keep their fuel injectors clean. That starts with keeping the fuel in your tank clean. High-quality fuel contains detergents and additives that help clean your engine. Brand-name fuel companies also deliver a more consistent quality of fuel to Houston vehicles than do bargain Houston area service stations.

The second way to keep your injectors clean is to keep your fuel filter clean. This filter screens dirt and rust out of the fuel as it travels from the tank to the engine. If the filter clogs up, fuel will bypass it and carry its load of dirt into the engine.

Houston residents should check their owner's manual to find out how often they should change their fuel filter. This should be part of your regular preventive maintenance. Also, remember that if you use bargain-brand or low-grade fuels, or if you drive an older vehicle, your filter will need to be changed more often.

You can also purchase cleaners at Westside Automotive that will protect your fuel injectors. These cleaners are added to the fuel tank. They work best at preventing build-up in your fuel injectors and can clean up small amounts of carbon, gum and varnish. But they won't be able to clean a fully gummed-up injector. Read the labels before using any of these products for full directions on their use. If your fuel injectors are gummed up, you can get a professional deep cleaning service at Westside Automotive in Houston that will result in better fuel economy and improved vehicle performance.

Good vehicle care will prevent serious damage to your fuel injector system. And this is one system that you want to keep in perfect condition.

Westside Automotive
12510 Oxford Park Dr.
Houston, TX 77082
281-589-8984
http://www.houstonwestsideautomotive.com

How to Radiate Cool (Radiator Care)

There's nothing that radiates cool like a vehicle radiator that's helping to keep your engine running at the proper temperature.  You don't have to baby it, but you can't simply ignore it, either. 

Let's take a quick dive under the hood to let you know what the radiator is doing.  It takes the heat your engine produces and moves that heat outside.  It's not an easy job and heat is an engine's number one enemy.  Now that you're thinking how nice you want to be to your radiator, we have a couple of ideas how you can take care of it.

The easiest thing is to pay attention to your vehicle's temperature gauge. If it gets in the "too hot" or "not hot enough" range, have it checked out soon.  Make sure your coolant is kept at the correct level and if you see a trend that you have to add coolant more than a couple of times a year, you might have a leak.

Even if there are no obvious problems, every couple of years or so, consider taking your vehicle in for radiator maintenance.  A technician can run a pressure check for leaks and ensure that the thermostat and radiator cap are working correctly.  The technician will check that fans are running like they should so they can move air over the radiator and heat away from the coolant inside.

Ask your service advisor when you should have your radiator flushed and coolant replaced according to the manufacturer's recommended intervals.  In addition to cooling, coolant has corrosion inhibitors which stop working after a while.  Without those corrosion inhibitors, the inside of your radiator can literally start rotting away.  Keep in mind that the coolant level must be kept at manufacturer's specifications since if those corrosion-preventing chemicals aren't touching the metal, they're not preventing corrosion. 

Different vehicles use different coolants, so your service facility will make sure yours is getting the correct one.  Keep your coolant system happy and one day, maybe you can order up a custom license plate, "RAY-D-8."

Westside Automotive
12510 Oxford Park Dr.
Houston, TX 77082
281-589-8984
http://www.houstonwestsideautomotive.com

More than Pads and Rotors (Brake Caliper Replacement)

You might be familiar with brake pads and rotors, two components of your vehicle's brakes that have to be regularly serviced.  Here's another important component of your brakes: the calipers.

Calipers are used in disc brakes, the type of brakes now found in most recently manufactured vehicles.  A caliper is the part of the brakes that squeezes the brake pads against the discs, or rotors, which turn with your wheels. 

There are different kinds of calipers, but the basic principle is the same.  You press down the pedal, brake fluid activates a piston or pistons that squeeze the brake pads against the disc and the friction slows down your vehicle.

While modern vehicles have a warning system to let you know it's time to get your brakes checked, your brake light usually goes on when your fluid level is low or your fluid pressure is low.  But you may have to look out for signals your calipers are the problem. 

If your vehicle pulls to one side when you brake, that could be a sign that one caliper isn't working right.  If you smell a burning odor coming from a wheel after a trip, there might be too much pressure from a caliper.  Grinding or squealing when you brake is another signal that it may be time to bring in your vehicle so we can check your brakes.

One way to minimize brake issues is regular inspection.  Have them periodically looked at when you bring in your vehicle for an oil change.  The good news is brake issues are more likely to be caused by pads or rotors wearing out.  Calipers last a lot longer, but even they will need replacing every so often.  

Westside Automotive
12510 Oxford Park Dr.
Houston, TX 77082
281-589-8984
http://www.houstonwestsideautomotive.com

The Daily Grind (Grinding Noise)

If your vehicle makes a grinding sound when you turn the steering wheel, it's speaking to you.  No, really, it is.  So listen to what it's saying and you could avoid a much more costly repair down the road.

A grinding sound coming from the front of your vehicle when you are turning can offer some very informative clues as to what's going on.  One cause could be that there's a problem with the mechanical linkage that enables you to turn the wheels.  Another is that the hydraulic system that makes turning the steering wheel easier may have its own problems. 

Think of it.  Hydraulic power steering has many components that need to work in tandem.  The power steering fluid may be too old and contaminated.  Or its level may be low. That may be caused by a leak somewhere in the system. A technician can check things over to find out exactly what's happening.

Other causes of grinding while turning can be problems with the suspension in the front.  You may have a failing CV (constant velocity) joint.  It could be your brakes are partially engaging while you are turning.  That metal-on-metal sound is never a sign that things are working just the way they're supposed to.

To a technician looking to pinpoint the problem with your vehicle, it's not a daily grind at all.  Experience and training will help her or him zero in on what's causing the noise and get you back on the road. Maybe you can enjoy your sound system more after that distracting background noise has disappeared!

Westside Automotive
12510 Oxford Park Dr.
Houston, TX 77082
281-589-8984
http://www.houstonwestsideautomotive.com