AUTONET TV

Alternator Facts (Failing Alternator)

If you notice that your headlights are flickering at night, that's something to pay attention to. While there could be many different things that could cause that problem, one possibility is your vehicle's alternator.

The alternator takes mechanical energy from the engine and turns it into electricity, in essence a generator.  The current it makes charges the battery and supplies power to the vehicle's electrical systems.  An alternator is made up of several different parts: a pulley, magnets, coil wires, brushes and a voltage regulator.  While your vehicle is running, these parts get a good workout and, after time, they begin to wear out.

Other symptoms of a failing alternator include your vehicle's lights dimming, the power windows going up and down more slowly than they used to, your power seats not moving quite as fast as before. 

Another sign of a worn out alternator is engine stalling.  Vehicles with fuel injection require a certain amount of power, and when an alternator is going bad, your engine could stall because the alternator isn't cranking out enough of it.

An alternator on its last legs can also fail to charge your battery properly.  Sometimes your battery isn't getting enough charge from the alternator and will go dead.  It also can be the opposite problem. The battery is getting too much power and will cause the battery to get hot.  Your vehicle may give you a clue on the instrument panel.  If you see any of these warning lights, take note: Check Engine, ALT, CHARGE or one that looks like a picture of a battery.  If that light is on, it's time to have your service facility give it a look.

As mentioned earlier, there are other components of your vehicle's electrical system that can fail, such as a worn out serpentine belt or a malfunctioning voltage regulator.  A reputable service facility has diagnostic tools to pinpoint the causes of your problems. And when your issues are fixed, your electrical system will be back to its hard-working self.  You'll get a real charge out of it!

Westside Automotive
12510 Oxford Park Dr.
Houston, TX 77082
281-589-8984
http://www.houstonwestsideautomotive.com

The ?Man-Made? Engine Oil (Synthetic Oil Change)

If you own a newer vehicle, your vehicle’s manufacturer may require that it use synthetic oil instead of conventional oil.  Synthetic oils are more stable, don’t break down as easily, and provide better engine protection than conventional oil. All those things can prolong the life of your engine and help it run better.

Imagine the damage that could happen to your engine as it operates at high speeds and very hot temperatures.  Oil reduces the friction between the metal parts.  That’s why it’s important that it maintains its lubricating properties for a long time, which synthetic oil does better than conventional oil.  

Clean oil is better than dirty oil because it has fewer impurities.  Synthetic oil is purer because of how it’s formulated and manufactured.  Plus, as the outside temperatures change, the ability of oil to operate in those conditions is important.  
For example, the colder it gets, it’s important for oil to flow easily to retain its lubricating properties. How thick a fluid is changes in different temperatures, and that thickness is known as viscosity, Synthetic oils are better at maintaining their viscosity throughout temperature changes. 

It’s not only newer vehicles that can benefit from synthetic oil.  If you have an older vehicle, synthetic oil may offer superior lubricating than conventional.  Our technicians can advise you what’s the best oil for your vehicle and how often you need to change it, which may vary from the owner’s manual recommendations.  You might find you’re able to change your oil less frequently than you used to with conventional oil.  

Yes, synthetic oil is more expensive than conventional, so let us help you decide whether its advantages are worth the difference in price.  

Westside Automotive
12510 Oxford Park Dr.
Houston, TX 77082
281-589-8984
http://www.houstonwestsideautomotive.com

Have a Ball! Know your Ball Joints (Ball Joints)

We all have joints in our own skeletal system, but did you know your vehicle has some joints of its own? One of the most important is called a ball joint.

One of the interesting things is that it's somewhat similar to the ball and socket joints we have in our hips and shoulders.  A ball joint allows two parts it joins together to move in more than one direction at the same time.

Think about your wheels.  They have to move up and down when there are bumps in the road but in sideways directions when you are making a turn. As you can see, the ball joints are important for your steering and handling to work correctly.

Since ball joints do so much, they can wear out and become loose.  When the ball wears down or the socket gets worn, there can be too much play in them.  It can get so bad that the ball can come out of the socket and your wheel can fall off, a dangerous situation.  Ball joints can also seize up.  Some of them are sealed and never require maintenance; others require periodic lubrication.

Here are some signs that your ball joints are going bad:

• Your vehicle pulls to one side
• You can hear a clunking noise coming from a wheel area
• Your tires are wearing unevenly, especially on the inside

The earlier a failing ball joint is discovered, the better. The best way is to have regular inspections by a technician.  Your service facility will periodically check ball joints at intervals recommended by the manufacturer. The cost to replace them can vary widely depending on whether you have a vehicle with a 2-ball or 4-ball configuration.  Also, sometimes just the joints can be replaced, but other times they are part of a larger control arm assembly that has to have all the parts replaced at the same time. 

Your vehicle's proper steering, handling and tire wear all contribute to a better, safer driving experience.  Make sure your ball joints are up to the job.

Westside Automotive
12510 Oxford Park Dr.
Houston, TX 77082
281-589-8984
http://www.houstonwestsideautomotive.com

Steer Me Right! (Failing Power Steering Hose)

Most drivers love how easy it is to turn their vehicles, and they have power steering to thank.  Engineers have figured out a way to take some of your engine's power to help you turn. Without it, steering can be quite a chore.  New power systems are electric, but there are still plenty of the older hydraulic power steering systems out there, and it's wise to keep them working the way they should so you don't find yourself stranded without power steering.

Those hydraulic power systems use a fluid under pressure that is pumped to a device that helps you turn your wheels more easily.  It's that pressure that presents the challenge.  After your vehicle's seen a few years on the road, you may find your steering isn't quite as easy as it was.  You may hear a groaning or humming sound when you turn. 

One component that can fail is the pressure hose that carries that fluid from the power steering pump to that turning assist mechanism.  The hose is made of rubber and can leak, crack, get damaged by heat and debris or just get too old.  If yours is ten years old or older, it's likely getting close to the end of its life.

If you think you can just wait until it fails completely, think of these possible consequences.  If the hose or a coupling fails, power steering fluid can blow all over the hot engine.  That fluid is flammable and can start a fire.  Or if you've been driving for a few weeks with low power steering fluid, that could ruin your power steering pump. Replacing the pump is an extra expense you can probably  live without.

A technician will replace the necessary parts and make sure air and contaminants are bled or flushed from the system.  Then, he or she will check for leaks.  Just think how important a properly working power steering system is for safe operation of your vehicle.  Make sure you keep yours in top shape for your safety's sake and the safety of others on the road around you.

Westside Automotive
12510 Oxford Park Dr.
Houston, TX 77082
281-589-8984
http://www.houstonwestsideautomotive.com