AUTONET TV

In a Fog (Fogged Windows in Cold Weather)

It's bad enough in cold weather when ice and snow block your visibility.  Add to that fog on the inside of your windows and you could be driving blind.  So here are a few tips on how to keep your windows from fogging up when there's a chill in the air.

You probably know fog is really condensation, when moist, warm air meets a cold surface and turns to liquid.  If your windshield fogs up, you probably turn on your windshield defroster. Most defrosters blow heated air on the windshield glass to warm it up so it won't condense the moisture.  Many also turn on the air conditioning to reduce the moisture. 

That same strategy can work on the rest of the windows.  First, turn up your heater's temperature setting.  The hotter the air, the more moisture it will hold.  Also, turn off the "recirculating" setting since you want all outside air to come in. Then switch on the air conditioning.  It will remove the moisture from the outside  air that it's blowing inside the cabin.  Try cracking a couple of windows to make it easier for the air to flow. This should do the trick pretty quickly. 

There's one other thing to try.  Many vehicles have electric heater elements embedded in the rear window glass (the rear window defroster) and in the outside rearview mirror glass. Make sure to turn those on, too; sometimes they're on the same switch.

For all of these things to work, of course, your vehicle's components have to be maintained so they'll do the things they're designed to do.  And you didn't think it was important to have your air conditioning working in the cold weather months! 

One final tip.  Keep the insides of your windows CLEAN.  Oil and dirt on the glass give the water molecules something to latch on to.  That ought to clear up this problem.

Westside Automotive
12510 Oxford Park Dr.
Houston, TX 77082
281-589-8984
http://www.houstonwestsideautomotive.com

Feeling Powerless (Why Is My Battery Light On?)

When one of your vehicle’s warning lights comes on, the first thing that comes to mind is, “Oh, no, what’s wrong now?” When it’s the battery light, it means there’s something wrong with your vehicle’s battery or charging system.  And because both are important for your vehicle to work properly, it’s a good idea to get it checked out.  Here are some things that may cause a battery light to illuminate.

It could be that your battery has failed.  It could be on its last legs or completely dead.  When it isn’t showing it has the voltage it should, your vehicle lets you know.

If it’s not the battery itself, it could be the system that charges it.  The alternator is part of that system and could have a problem.  It could be putting out no power, too little power, or too much.  The alternator may not be working because the belt that drives it (using the engine’s mechanical power) could be broken or slipping.  Or the alternator pulley may be broken.

The alternator needs to have a solid connection to the battery, and sometimes the posts that connect to the battery cables get so corroded, they can’t conduct enough electricity. Or it could be that a battery cable isn’t conducting power properly. 

Because the alternator supplies power to other parts of your vehicle, if it gets overloaded, it will also cause your battery light to come on.  Other possibilities are an electrical short in the charging system or a failed voltage regulator.

Your vehicle may be hard to start or it may not start at all if you have any of these problems. It’s important to bring it in to us so we can diagnose and repair the problem before you wind up stranded… and feeling really powerless.  

Westside Automotive
12510 Oxford Park Dr.
Houston, TX 77082
281-589-8984
http://www.houstonwestsideautomotive.com

Rubber Match (Tire Replacement)

A set of new tires isn't probably high on anyone's list of exciting purchases.  But since your life is literally riding on them, it's probably a good idea to know when it's time for you to buy new ones.

If you've been feeling your vehicle slipping more in wet weather or it takes a longer distance to stop, those are a couple of signs you may need new rubber all around. Here's how to make your decision.

First thing to do is look at your tires.  The surface of the tire that contacts the road is the tread. When that tire was new, the tread was deep (the grooves in the rubber that provide traction). If they're starting to look somewhat smooth, you have a seriously worn tire that definitely needs replacing.  Bring your vehicle in for us to look at your tires and we can check your tread with a tread gauge.

Also look at the sides of your tires.  If they have cuts or cracks in them, or if you see signs of bulges or scrapes made by hitting curbs or potholes, those could be signs of serious damage. 

Keep an eye on your tire pressure monitors.  If you notice one or more of your tires showing frequent pressure changes, that needs to be checked out. 

One other thing you probably didn't know is that your tires all have birthdays, and they're printed on each sidewall.  When you bring your vehicle in for us to inspect your tires, we can tell you how old they are. That's important because rubber deteriorates with age, even if they don’t have that many miles on them.  Tire manufacturers recommend replacing tires when they reach a certain age, usually from six to ten years old. 

Now the question is, which tires should you buy? That's one for your service adviser who can recommend replacements based on your driving style, the model of vehicle you own, where you drive most often, and other factors. 

Oh, and if you want your new set of tires to last as long as possible, remember to have them rotated regularly, keep the right pressure, and don't drive aggressively. 

Westside Automotive
12510 Oxford Park Dr.
Houston, TX 77082
281-589-8984
http://www.houstonwestsideautomotive.com

Straight Ahead (Wheel Alignment)

If every road was straight and smooth, we wouldn't have to worry much about wheel alignment. But they're not, so we do.  Hitting potholes or driving on rough pavement can knock your vehicle out of alignment and you'll notice it in one of several ways.

Your steering wheel may not be centered when you're driving straight ahead, or your vehicle may pull to one side.  You may find your tires wearing on one side or they may squeal.  All are signs that could point to you needing an alignment.

Your wheels should be perpendicular to the road and parallel with each other.  If not, your tires will wear out faster and your vehicle won't go straight on a level straightaway.

In alignment, there are several factors that must be checked.  One is camber.  Your wheels should be straight up and down if you look at them from the front. If not, you'll wear your tires unevenly on one side.

Another factor is caster, the angle of the steering pivot.  Most vehicles have what's called positive caster, when the top of the steering pivot leans toward the rear.  Proper caster balances steering effort, stability on the highway and cornering.

You may have heard the term "toe" in reference to your wheels.  If you looked at your front wheels from straight above, for example, imagine your wheels were your feet.  If you were to turn your toes in toward each other, that would be toeing in.  The toe of your vehicle should be set to manufacturer's specifications so your vehicle handles well and doesn't prematurely wear out tires.

It's a good idea to have your alignment checked periodically since it can get knocked out by one hard knock or a lot of little knocks.  It's not just about tire wear, it's about ride comfort and safe handling. You may say a vehicle aligned just feels divine.

Westside Automotive
12510 Oxford Park Dr.
Houston, TX 77082
281-589-8984
http://www.houstonwestsideautomotive.com